Advanced 4-20mA Vibration Transmitter for PLC and Scada

• Customization: Available
• Type: Piezoelectric
• Output Signal Type: Digital Output
• Model NO.: IMI sensor 645
• Accuracy Grade: 0.1G
• IP Rating: IP68
• Certification: CE
• Customized: Customized
• Transport Package: Wooden
• Trademark: Highpeak
• Origin: China
• HS Code: 9026100000
• Production Capacity: 100000peices/Years

Product Description

IMI sensors manufacture a range of loop-powered vibration transmitters with current output. These transmitters are ideal for monitoring in the process industry, where programmable logic controllers (PLCs), distributed control systems (DCS), or supervisory control and data acquisition (SCADA) systems are typically used to collect continuous 7x24 hour monitoring signals from critical rotating equipment. The current output can directly interface with these existing monitoring systems, allowing simple monitoring and analysis of the data.Most factories already have PLC, DCS, or SCADA systems in place to monitor parameters such as pressure, flow, and temperature. IMI's loop-powered 4-20mA vibration transmitters are plug-and-play and use loop power instead of separate dedicated power supplies. A loop power supply of 12-30 VDC can power the transmitters, while the process controller converts the transmitter's current output into a voltage for measurement. The transmitters are easy to integrate with existing systems, enabling the monitoring of critical equipment without the need for additional expensive data acquisition systems.

Military standard connector transmitter

Model number 645B00,645B01,645B02

·Small size, easy to install in a narrow space
·Ideal for motor, water pump and gear box
 

This type of transmitter offers three selectable units of measurement: vibration acceleration, velocity, or displacement. The choice of measurement unit is generally determined based on the frequency. The table below provides general guidelines on which measurement unit to use for different frequency ranges.

Measurement frequency band
frequency	unit of measurement
0-100 Hz	displacement
100-1000 Hz	speed
greater than 1000 Hz	acceleration

 

technical specifications
model	645B00	645B01	645B02
function
range	0-5g RMS 0-49  m/s² RMS	0-5g RMS 0-49  m/s² RMS	0-5g RMS 0-49  m/s² RMS
output	4-20 mA
Frequency Range (± 3dB)	3-1000 Hz	3-5000 Hz	3-10000 Hz
Broadband resolution	0.025 g RMS 0.24m/s²RMS
Non-linearity	±1%
environment
temperature range	-40-+185F -40-+85ºC
levels of protection	IP68
Electrical parameters
driving voltage	12-30 VDC
load voltage	50(Vs-12)ohms
stabilization time	<15 sec
Electrical isolation	>10^8ohm
Physical parameters
sensor element	pottery and porcelain
Sensing geometry	shear
Shell material	stainless steel
seal	Air tight welding
Install thread	1/4-28 Female
Install torque	3-5ft-1b 4-7Nm
Electrical joint	2-pin MI
weight	4.70z 131g
appendix
Model 081A40: Mounting stud, 1 / 4-28x0.438 in.

Dimension

 


 

Company Profile

Cold Valley Intelligent Technology (Shanghai) Co., Ltd. is a distinguished member of the prestigious Hanshan (Cold Mountain) Intelligent Technology Co., an elite enterprise dedicated to innovation and excellence.
(hereinafter referred to as Hanshan Intelligent Technology Co., Ltd. group) proudly commenced its operations in the bustling metropolis of Shanghai in 2013, marking a new era in technological advancement.
The founding team, comprised of veterans from world-leading automation giants, boasts an impressive collective experience: over two decades in the automation industry, coupled with more than 20 years in automation engineering, and a decade's worth of expertise in consulting and implementing cutting-edge digital solutions. Their mission is clear: to deliver top-tier automation and digitization products and services that cater to a global clientele. Strategically headquartered in Shanghai, China, the company stands as a beacon of technological prowess.
With a rich legacy spanning over two decades in the petrochemical sector, the company possesses unparalleled insights into the automation and digitalization demands across the industry spectrum-upstream, midstream, and downstream. They offer professional-grade products and comprehensive solutions, meticulously curated for the petroleum, chemical, electric power, biomedicine, APIs, food and beverage, liquor, metallurgy, and non-ferrous metal industries, ensuring full life-cycle service excellence.