Advanced Hart Communication Pressure Transmitter for Liquid and Gas Measurement

• Customization: Available
• Type: Medium & High Temperature Pressure Transmitter
• Structure Type: Diffused Silicon Pressure Transmitter
• Model NO.: PDS805
• Measuring Medium: Liquid
• Accuracy Grade: 0.1G
• IP Rating: IP67
• Certification: CE
• Customized: Customized
• Transport Package: Wooden
• Trademark: Highpeak
• Origin: China
• HS Code: 90262010
• Production Capacity: 50000peices/Years

Product Description

Product Description

PDS805 The pressure transmitter is used to measure the liquid, gas or steam pressure, and convert it into 4-20 mAd. c. current (superimposed HART communication), PROFIBUS-PA communication signal, FF communication signal output, which can realize remote setting, monitoring and other functions through the communication equipment.

Features

High stability
The basic accuracy of PDS intelligent transmitter is 0.04%FS (up to 0.025%FS). After 10 years of continuous use, it can still maintain 99.9% accuracy, saving considerable maintenance costs. PDS intelligent transmitter uses strong metal shell and fully sealed measurement parts, can calmly cope with extreme chemical and mechanical load, at the same time has a strong anti-electromagnetic interference ability and lightning protection function, to ensure the high stability and high reliability of PDS transmitter.

Intelligent diagnosis
The PDS intelligent transmitter has the integrated diagnosis function to monitor the operation process and its own state in real time. After exceeding the defined number of events, the transmitter enters the fault alarm state to output the alarm current (3.6 or 22.8mA) to provide the control signal for the system interlocking or SIS security system. During the failure, the LCD display automatically displays "Err", and automatically analyze and display the faulty parts, making the instrument maintenance, repair and replacement become more simple and convenient.
The diagnosis function can also be started through HART, FF, PA and other protocol communication, and the alarm can be expressed as a warning or fault protection current. Automatically diagnose SENSOR, ROM, RAM, EEPROM, software health. When the electronic unit or measurement element is damaged, the faulty component can be replaced directly at the site without re-adjustment.

Simulation
The simulation function of the transmitter can simulate the process state to obtain the measurement data, and can also be used to check the connection and output status of the transmitter circuit. The ulation output parameters include: pressure, sensor temperature and electronic temperature. The simulation output mode includes: fixed value simulation or linear function simulation. During the simulation, the transmitter output does not change with the field pressure, and returns to the normal measurement state after key operation or power off restart of the transmitter.

Product Parameters

 

Basic accuracy: ±0.04% (maximum ±0.025%)

Range ratio: 100:1

Response time: 90ms (data refresh time: 50ms)

Range range: differential pressure 0-100 Pa-14MPa
Pressure of 0-1 kPa-70MPa

Output signal: 4-20 mA superimposed HART protocol communication (version HART6.0/ HART 7.0)
                       PROFIBUS-PA fieldbus communication (version 3.02)
                       FF Fidbus Communication (Version 6.1.1)

Overload limit: differential pressure of 42MPa
Pressure of 105MPa

Effect of the static pressure: 0.03%FS / 16MPa

Temperature range: Ambient temperature-40ºC ~80ºC (for explosion-proof temperature range, see explosion-proof grade)
                                Process temperature-90ºC~700ºC
                                LCD temperature-35ºC~80ºC

Long-term drift: ± 0.1%FS / 10 years

Temperature Effect: (0.06 * r + 0.01)% / 28ºC (-40ºC ~80ºC)

Explosion-proof grade: NEPSI: Type Ex iaIICT4 Ga (Note 1) (applicable ambient temperature-40ºC ~60ºC)
                                     NEPSI: Intrinsic Ex iaIICT6 Ga (Note 1) (applicable ambient temperature-40ºC~40ºC)
                                     NEPSI: explosive type Ex dIICT6 Gb (applicable ambient temperature-40ºC ~60ºC)
                                     NEPSI: Dust explosion Ex tD A21 IP67 T85ºC
                                     NEPSI: "n" explosion-proof Ex nACT6 Gc (applicable ambient temperature-40ºC ~ + 60ºC)
                                     ATEX: Ben Ex II 1 G Ex iaIICT4 Ga,
                                     ATEX: burst Ex II 1 / 2 G Ex dbIICT6-T 4 Ga / Gb
                                     IECEx: Intrinsic safety Ex iaIICT4 Ga
                                     IECEx: burst Ex dbIICT6-T 4 Ga / Gb

 

Company Profile

Cold Valley Intelligent Technology (Shanghai) Co., Ltd. stands proudly as a member enterprise of the esteemed Hanshan (Cold Mountain) Intelligent Technology Co.
(hereinafter known as Hanshan Intelligent Technology Co., Ltd. group), established its formal roots in the bustling city of Shanghai in 2013.
Our founding team comprises seasoned professionals hailing from top-tier international automation companies, boasting over 20 years of expertise in the automation industry, automation engineering, and a decade of consulting and implementing digital solutions. Our mission is dedicated to delivering superior automation and digitization products and services to our global clientele, with our headquarters proudly situated in Shanghai, China.
For over two decades, we have been deeply ingrained in the petrochemical industry, possessing a profound understanding of automation and digitalization needs across upstream, midstream, and downstream enterprises. We offer professional products, solutions based on automation and digitalization, and comprehensive life cycle services to sectors such as petroleum, chemicals, electric power, biomedicine, APIs, food and beverage, liquor, metallurgy, and non-ferrous metals.

FAQ