| Customization: | Available |
|---|---|
| IP Rating: | IP65 |
| Certification: | CE |
Suppliers with verified business licenses
| Project | MW501 | MW502 | MW503 | MW504 |
| Measurement Range(100%) | ||||
| Flow Rate(m3/h) | 0.16-30 | 0.16-30 | 24-250 | - |
| Flow Velocity(m/s) | - | - | - | 0.4-4 |
| Repeatability | ±3% | |||
| Measurement Accuracy | ±15% | |||
| Connections | ||||
| Pipe Thread R | 3/4"-2" | - | - | - |
| Flange DIN,HG | - | DN15-DN50(65) | DN80(65)-DN200 | DN150 |
| GBANSI,JIS | - | 1/2"-2"(2 1/2") | 3" (2 1/2")-8" | 6" |
| Measurement System | ||||
| Target Plate, Conical Tube Target Plate,Nozzle Target Plate, Straight Tube | C E - |
C E - |
- - P |
- - P |
| Indication | ||||
| Graduated Scale Rotating Pointer | E T |
E T |
E T |
E - |
| Fluid Direction | ||||
| Vertical/Bottom to Up | VU | VU | VU | - |
| /Top to Down | VO | VO | VO | - |
| Horizontal/Any Direction | H | H | H | H |
| Maximum Operating Pressure | ||||
| Standard Type | ||||
| Pipe Thread | 4.0 | - | - | - |
| Flange DIN | 4.0 | 1.6 | 1.6 | |
| 1.6(DN65) | 1.0(DN80-DN200) | |||
| ANSI | 150lbs(2 1/2") | 150lbs(8") | ||
| Special Requirements | As Requested | As Requested | As Requested | As Requested |
| Medium Temperature | ||||
| Standard Ventilation Casing High-Temperature H2 High-Temperature H3 |
≤100ºC ≤150ºC ≤200ºC ≤300ºC |
≤100ºC ≤150ºC ≤200ºC ≤300ºC |
≤100ºC ≤150ºC ≤200ºC ≤300ºC |
≤100ºC ≤150ºC ≤200ºC ≤300ºC |
| Medium Viscosity(mPa.s) | ||||
| Standard Special Type |
≤30 >30 |
≤30 >30 |
≤30 >30 |
≤30 >30 |
| MW50A/B/C DIE/F/G/H | |
| Symbol | Option |
| A Type | |
| 1 | Male pipe thread installation |
| 2 | Flange installation |
| 3 | Flange installation |
| 4 | Insertion installation for pipes above DN250mm |
| B Flow Number | |
| C | Target plate + cone tube form |
| E | Target plate + nozzle form |
| P | Target plate + straight pipe form |
| C Structural Material | |
| C0 | Carbon steel |
| R1 | 304SS |
| RO | 316SS |
| D Indicator Type | |
| T | T-type indicator |
| E | E-type indicator |
| 1 | Explosion-proof type, no on-site flow indication |
| 2 | H3 high-temperature type, no on-site flow indication |
| E Limit Switch | |
| K1 | 1 bistable limit switch, can be set at the maximum or minimum flow point |
| K2 | 2 bistable limit switches, can be set at the maximum or minimum flow point |
| KV1 | 1 bistable limit switch with relay |
| KV2 | 2 bistable limit switches with relays |
| F Connection | |
| S | Pipe threads3/4"-2" |
| F | Flange DN15-DN200 |
| G Explosion-proof Type | |
| 0 | No requirements |
| 1 | Exi intrinsically safe type |
| 2 | Exd separated welding type |
| H Connection | |
| M | M20X1.5 |
| N | 1/2"NPT |
){kind=link}