| Customization: | Available |
|---|---|
| Type: | Silicon Piezoresistive Type |
| Structure Design: | Input Type |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| product model | MPS7500 |
product appearance |
|
| emission frequency | 120GHz~130GHz, FM scan frequency width 10GHz |
| measuring range | 0.1-50/100/150m |
| Measure resolution | 0.01mm (50m range) / 0.1mm (100m range) |
| certainty of measurement | <±2mm |
| beam angle | 1.0° (with lens antenna cover) |
| Use the dielectric constant range | 1.0~100, medium viscosity <1000cp |
| Power supply scope | 16.5~42VDC, two-wire system |
| communication mode | HART/MODBUS bus |
| signal output | 4~20mA (with HART/MODBUS) or RS-485 |
| Control output | 1 line, 24VDC, 5A relay; configurable alarm range control |
| Fault output | 4mA, 22mA and 20.5mA (configurable) |
| Field operation/programming | 4 keys The upper computer setting software or tank side meter can be configured |
| Process temperature/humidity | -60~200ºC/≤95%RH; -60~1000ºC (with antenna heat sink / quartz isolation flange) |
| Shell material | aluminium die casting |
| Antenna type | Lens antenna, PTFE/PEEK/PE, can be equipped with lens antenna cover/anti-corrosion antenna/antenna heat pipe/quartz isolation flange |
| Process pressure | -0.1~4MPa; -0.1~32MPa (equipped with quartz isolation flange) |
| cable inlet | M20x1.5 |
| Recommended cables | AWG18 or 0.75mm2 |
| levels of protection | IP67 |
| anti-hazard classification | Explosion-proof type Ex d IIC T6 Gb, intrinsically safe type Ex ia IIC T6 Ga |
| way to install | M56x2 thread / or DN50 flange installation |
){kind=link}