Highpeak Top-Guided Structure Pressure Reducing Valve for Low Pressure Loss

• Customization: Available
• Media: Oil
• Certification: CCC, RoHS, ISO, CE
• Model NO.: TKLM240
• Temperature: Ordinary Temperature
• Connection: Thread
• Valve Seat: Single-Seat
• Structure: Spring Diaphragm
• Material: Stainless Steel
• Transport Package: Wooden
• Trademark: Highpeak
• Origin: China
• HS Code: 8481100090
• Production Capacity: 50000peices/Years

Product Description

Product Description

 

Introducing the TKLM240 multi-stage pressure reducing regulating valve, an epitome of engineering brilliance! Crafted as an enhanced pressure balanced regulating valve, it boasts high-performance sealing rings on the valve plug streamline or sleeve, dramatically boosting its leakage rating. Revel in its compact, S-shaped channel design, complemented with a flow guiding wing that optimizes fluid balance around the sleeve. The result? Exceptionally low pressure drop loss, impressive high flow rate, and a remarkably wide adjustable range. Experience unparalleled accuracy in flow characteristics and a stellar 13 stages of pressure reduction, all in compliance with the esteemed IEC534-2-1976 standard.
Adhering to the ANSI B16.104 standard, the regulating valve's leakage amount is meticulously controlled. Equipped with a state-of-the-art multi-spring diaphragm, cylinder, or electric actuator, this valve promises a compact structure and delivers formidable output force, setting new benchmarks in performance.
This unparalleled product proudly meets the GB/T4213-92 standard, ensuring superior quality and reliability.

Valve body

Type		Through-Pass Single-Seat Cast Sphere Valve.
Nominal Diameter		32,40,50,65,80,100,125,150,200,250,300,350mm
Nominal Pressure		ANSI 125,150,300,600 JIS 10,16,20,30,40K PN1.6,4.0,6.4MPa
Connection Type	Flange Connection Sealing Face Type	FF,RF,RJ,LG,MFM
	Flange Standard	JIS B2201-1984,ANSI B16.5-1981,JB/T79.1-94(PN1.6MPa),JB/T79.2-94(PN4.0,6.4MPa), HG20596-97,HG20618-97 ect.
	Welded Connection	Socket Weld SW(32~50mm)    Butt Weld BW(65~350mm)
Material		see table 2
Upper Valve Cover	Normal Temperature Type (P)	-5~+230ºC
	Elongation Type I (EI)	+230~+566ºC
	Elongation Type II (EII)	-100~-45ºC
	Elongation Type III (EIII)	-196~-100ºC
	Note: The operating temperature must not exceed the allowable range for various materials.
Pressure Cover Type		Bolt Tightening Type
Filling Material		V-type Polytetrafluoroethylene Packing, Polytetrafluoroethylene-impregnated Asbestos Packing, Asbestos Woven Packing, Graphite Packing

Table 2-1: Valve Body Material: Expertly crafted Carbon Steel.

Valve Body Material		WCB,SCPH21,LCB
Cylinder	Material	SUS630
	Treatment	HT
Valve Core	Material	SUS630
	Treatment	HT
Valve Seat	Material	F4	PEEK	SUS630	SUS630	SUS630
	Treatment			HT	HT	HT
Balancing Seal Ring	Material	R ·TFE	R ·TFE	R ·TFE	Flexible Graphite Grafoil	Corrosion-Resistant Cast Iron.
	Gasket Ring	SUS316	SUS316	SUS316
Allowable Seat Leakage		Class V	10^-5	Class IV	Class IV	Class 3
Ambient Temperature (ºC)		-5~200	-5~300	-5~300	+300~+425	+300~+425

Note: R·TFE represents Reinforced Polytetrafluoroethylene, a hallmark of durability, while HT signifies Heat Treatment, ensuring long-lasting resilience.
Table 2-2: Valve Body Material: Premium Stainless Steel, synonymous with strength and longevity.

Valve Body Material		SCS13A,SCS14A
Cylinder	Material	SUS316
	Treatment
Valve Core	Material	SUS316             SUS316             SUS316             SUS316             SUS316
	Treatment	ST                             ST                                          ST
Valve Seat	Material	F4	PEEK	SUS316	SUS316	SUS316
	Treatment			ST	ST	ST
Balancing Seal Ring	Material	R ·TFE	R ·TFE	R ·TFE	Flexible Graphite Grafoil	Corrosion-Resistant Cast Iron
	Gasket Ring	SUS316	SUS316	SUS316
Allowable Seat Leakage		Class V	10^-5	Class IV	Class IV	Class
Ambient Temperature (ºC)		-196~200	-73~300	-196~300	+300~+566	+300~+566

Actuator

Type	HA diaphragm actuator with multiple springs, cylinder-piston actuator, electric actuator
Diaphragm Material	Ethylene-Propylene Rubber with Nylon Cloth, Butadiene-Acrylonitrile Rubber with Nylon Cloth
Spring Range	20~100,80~240KPa(for HA type),190~350,190~400KPa(Piston Type.)
Supply Pressure	140~400KPa(for HA type),400~500KPa(Piston Type.)
Air Source Connection	RC1/4"(for HA and VA type),G3/8,1/2"(Piston Type.)
Ambient Temperature	-30~+70ºC

Dimension

Company Profile

 

 

Cold Valley Intelligent Technology (Shanghai) Co., Ltd. stands as a venerable pillar of Hanshan (Cold Mountain) Intelligent Technology Co.'s illustrious legacy. As a vanguard of innovation and excellence, our company epitomizes the zenith of trailblazing technological advancements.
Operating under the prestigious Hanshan Intelligent Technology Co., Ltd. group umbrella, our odyssey began in 2013 within the bustling innovation hub of Shanghai. Since inception, we have been the harbingers of a new dawn in technological evolution and progress.
Our founding team, a vaunted consortium of seasoned experts from the realm of global automation giants, offers a fusion of over two decades of engineering mastery in automation and a decade of consulting and implementing elite digital solutions. Our unwavering mission is to deliver unparalleled automation and digitization services to a diverse global clientele, emanating from our strategic base in Shanghai, China. We proudly stand as a beacon of cutting-edge technological prowess.
With over 20 years of illustrious experience in the petrochemical sector, we have amassed profound insights into the automation and digitalization prerequisites across the entire industrial spectrum - upstream, midstream, and downstream. We offer bespoke, professional-grade products and comprehensive solutions tailored to the needs of industries such as petroleum, chemical, electric power, biomedicine, APIs, food and beverage, liquor, metallurgy, and non-ferrous metals, ensuring peerless excellence throughout their lifecycle.

FAQ

You may have these questions

How do I select the right product?
A: Upon receiving your inquiry, our comprehensive technical dossier will provide all the necessary insights. This documentation will enable you to thoroughly verify the process parameters and technical specifications pertinent to your needs. With this information, we will expertly recommend the model that precisely aligns with your specific requirements.

I would like a confirmed model. Can you provide that?
A: Certainly. Once you communicate the model you are interested in, we will conduct a thorough verification process to ensure its suitability. If there are opportunities for cost-effective enhancements, we will gladly offer optimization suggestions. After your confirmation, we will proceed with crafting a formal quotation, tailored to meet your objectives.