| Customization: | Available |
|---|---|
| Accuracy: | ±0.6-1% |
| Main Application: | Water, Wastewater, Diesel Fuel, Fuel Oil, Nature Gas, Corrosive Liquid/Gas |
Suppliers with verified business licenses
| Medium Measured | Liquid without impurity,low viscosity,no strong corrosive action | |||
| Standards Executed | Turbine flow sensor(JB/T9246-1999) | |||
| Calibration Specification | Turbine flow meter(JJG1037-2008) | |||
| Instrument Caliber | Flange connection type | DN15-DN200 | ||
| Thread connection type | DN4-DN50 | |||
| Clamping connection type | DN4-DN200 | |||
| Instrument Material | 304 stainless steel,316(L)stainless steel,etc. | |||
| Flange Standard | Conventional standards | GB/T9113-2000 | ||
| Other standards | International flange standards |
Like German standard DIN,American standard ANSI, Japanese standard JIS |
||
| Domestic pipe flange standards |
Like standards of Ministry of Chemical Industry, Standards of Ministry of Machinery |
|||
| Thread Specifications | Conventional specifications | Pipe thread of British system (external thread) | ||
| Other specifications | Internal thread,spherical thread,NPT thread,etc. | |||
| Accuracy Class and Corresponding Repeatability |
Accuracy class*1 |
±0.1%R | ±0.5%R | ±0.2%R(has to be customized) |
| Repeatability | ≤0.15% | ≤0.1% | ≤0.03% | |
| Range ratio | 10:1~20:1 | |||
| Output signal | Sensor:pulse frequency signal,low level≤0.8V,high level≥8V Transmitter:two-wire system4~20mADC current signal |
|||
| Power supply | Sensor:+12VDC,+24VDC(optional) Transmitter:+24VDC\220V Display type on site:3.6V lithium battery on the instrument |
|||
| Signal Transmission Line | STVPV3×0.3(three-wire system),2×0.3(two-wire system) | |||
| Transmission Distance | ≤1000m | |||
| Signal Line Interface | Basic type:Hausman joint,explosion-proof type:internal thread M20×1.5 | |||
| Explosion Proof Class | Basic type:not explosion proof,explosion-proof type:ExdlIBT6 | |||
| Calibration Conditions | Calibration device | Fluid flow calibration device with standard meter approach Fluid flow calibration device with static mass approach |
||
| Environmental conditions | Ambient temperature | 20ºC | ||
| Relative humidity | 65% | |||
| Operation Conditions | Medium temperature |
T1(general type) | -20ºC~+80ºC | |
| T2(high temperature type,optional) |
-20ºC~+120ºC | |||
| T3(high temperature type,optional) |
-20ºC~+150ºC | |||
Ambient temperature Atmospheric pressure |
-20ºC~+70ºC | Relative humidity | 5%~90% | |
| 86kPa~106kPa | ||||
| Measured Medium | Large pipeline liquid like circulation water | |||
| Accuracy Class | ±5%,±2.5% | |||
| Sensor Type | Tangential type | |||
| Axial sensor | ||||
| Structure Type | Integrated meter | |||
| Split type meter | ||||
| Instrument Caliber and Connection Type |
Easy plug-in | DN150-DN1100 | ||
| Online plug-in | DN150-DN1100 | |||
| Pressure Class | 1.6MPa | |||
| Meter Material | Screw | Stainless steel | Impeller | 2Cr13 |
| Flange | Carbon steel | Guide frame | Stainless steel | |
| Short section | Ball valve | |||
| Plug-in type depth | When the inner diameter of the pipeline (DN)≤1050mm,the plug-in depth is: | |||
| Tangential type | 0.5×DN-20mm | |||
| Axial type | 0.5×DN | |||
| Range ratio | 10:1 | |||
| Output signal | Sensor:pulse frequency signal,low level≤0.8V,high level≥8V | |||
| Transmitter:two-wire system 4~20mADC current signal | ||||
| Power supply | Sensor:+12VDC,+24VDC(optional) Transmitter:+24VDC,220V On-site display type:3.6V lithium battery on the instrument |
|||
| Signal transmission line | STVPV3×0.3(three-wire system),2×0.3 (two-wire system) | |||
| Transmission distance | ≤1000m | |||
| Signal line connection port | Basic type:Hausman joint,explosion proof:inner thread M20×1.5 | |||
| Explosion proof class | Basic type:not explosion proof,explosion proof:ExdIIBT6 | |||
| Calibration conditions | Calibration device | Fluid flow calibration device with standard meter approach Fluid fow calibration device with static mass approach |
||
| Ambient conditions | Ambient temperature | 20ºC | ||
| Relative humidity | 65% | |||
| Operation conditions | Medium temperature | T1(general type) | -20ºC~+80ºC | |
| T2(high temperature type,optional) |
-20ºC~+120ºC | |||
| T3(high temperature type,optional) |
-20ºC~+150ºC | |||
| Ambient temperature | -20ºC~+70ºC | Relative humidity | 5%~90% | |
| atmospheric pressure | 86kPa~106kPa | |||
| Measurement medium | Liquid for health care fields like food and liquor | |||
| Execution standards | Turbine flow sensor(JB/T9246-1999) | |||
| Execution standards | Turbine flow meter(JJG1037-2008) | |||
| Meter caliber and connection method |
Clamp connection type | DN4-DN100 | ||
| Accuracy class | ±1%R,±0.5%R,±0.2%R (to be made specially) |
|||
| Instrument material | Sensor | 316(L)/304 stainless steel | Guide frame | 316/304 |
| Impeller | Dual phase steel | 304 | ||
| Range ratio | 10:1~20:1 | |||
| Pressure level | 1.0MPa | |||
| Output signal | Sensor:pulse frequency signal,low level≤0.8V,high level≥8V Transmitter:two-wire system 4~20mADC current signal |
|||
| Power supply | Sensor:+12VDC,+24VDC(optional) Transmitter:+24VDC\220V On-site display type:3.6V lithium battery on the instrument |
|||
| Signal transmission line | STVPV3×0.3 (three-wire system),2×0.3(two-wire system) | |||
| Transmission distance | ≤1000m | |||
| Signal line connection port | Basic type:Hausman joint,explosion proof:inner thread M20×1.5 | |||
| Explosion proof class | Basic type:not explosion proof,explosion proof:ExdlIBT6 |
|||
| Calibration conditions | Calibration device | Fluid flow calibration device with standard meter approach Fluid flow calibration device with static mass approach |
||
| Ambient conditions | Ambient temperature | 20ºC | ||
| Relative humidity | 65% | |||
| Operation Conditions | Medium temperature | T1(general type) | -20ºC~+80ºC | |
| T2(high temperature type,optional) |
-20ºC~+120ºC | |||
| T3(high temperature type,optional) |
-20ºC~+150ºC | |||
| Ambient temperature | -20ºC~+60ºC | Relative humidity | 5%~90% | |
| Atmospheric pressure | 86kPa~106kPa | |||
){kind=link}